Deadpool & Wolverine 3D 1080p48 BluRay x264 AAC7.1 torrent

Presented in full resolution, frame-sequential 3D (FS3D). FS3D provides a higher quality per MB than the common Full-SBS or Full-TAB formats. If your display can support FS3D, you should prefer it. Most LG passive 3DTV's support it and it's supported on VR platforms using the newest version of 4XVR!

If your display doesn't support this file, you can convert it to SBS or OU using the method below.



Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Count of views : 2
MultiView_Layout : Both Eyes laced in one block (left eye first)
Format settings : CABAC / 4 Ref Frames
Format settings, CABAC : Yes
Format settings, Reference frames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 2 h 7 min
Bit rate : 6 968 kb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 47.952 (48000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.070
Stream size : 6.23 GiB (92%)
Writing library : x264 core 165 r3222 b35605a
Encoding settings : cabac=1 / ref=4 / deblock=1:-1:-1 / analyse=0x3:0x133 / me=umh / subme=8 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=24 / chroma_me=1 / trellis=2 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=24 / lookahead_threads=6 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=5 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=480 / keyint_min=47 / scenecut=40 / intra_refresh=0 / rc_lookahead=96 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.70 / qpmin=0 / qpmax=69 / qpstep=4 / vbv_maxrate=62500 / vbv_bufsize=78125 / crf_max=0.0 / nal_hrd=none / filler=0 / frame-packing=5 / ip_ratio=1.40 / aq=3:0.80
Default : Yes
Forced : No
Color range : Limited
Matrix coefficients : BT.709
Audio
ID : 2
Format : AAC LC
Format/Info : Advanced Audio Codec Low Complexity
Codec ID : A_AAC-2
Duration : 2 h 7 min
Bit rate : 559 kb/s
Channel(s) : 8 channels
Channel layout : C L R Ls Rs Lw Rw LFE
Sampling rate : 48.0 kHz
Frame rate : 46.875 FPS (1024 SPF)
Compression mode : Lossy
Delay relative to video : 9 ms
Stream size : 512 MiB (7%)
Default : Yes
Forced : No

If your passive 3D display doesn't support this file and you need to convert to Top/Bottom, you can do this in Potplayer. Use Avisynth like this:

If your passive 3D display is 1080p and supports 48/96Hz, use these settings:


potplayer_source()
left = selecteven
right = selectodd
left1 = selecteven(separatefields(left))
left2 = selectodd(separatefields(left))
right1 = selectodd(separatefields(right))
right2 = selecteven(separatefields(right))
interleave(stackvertical(left1,right1), stackvertical(left2,right2))
assumeframebased
assumefps(48000/1001.0)

If your passive 3D display is 1080p and doesn't support 48/96Hz, use:

potplayer_source()
Stackvertical(Selecteven.spline16resize(1920,540),Selectodd.spline16resize(1920,540))
assumefps(24000/1001.0)

If your display uses battery powered glasses and supports 48/96Hz, convert to Side by Side using:


potplayer_source()
left = selecteven
right = selectodd
left1 = selecteven(separatecolumns(left,2))
left2 = selectodd(SeparateColumns(left,2))
right1 = selectodd(SeparateColumns(right,2))
right2 = selecteven(separatecolumns(right,2))
interleave(StackHorizontal(left1,right1), StackHorizontal(left2,right2))
assumeframebased
assumefps(48000/1001.0)

If your display uses battery powered glasses and doesn't support 48/96Hz, convert to Side by Side using:

potplayer_source()
Stackhorizontal(Selecteven.spline16resize(960,1080),Selectodd.spline16resize(960,1080))
assumefps(24000/1001.0)

To watch in 2D, use:

potplayer_source()
selecteven